A fire extinguisher must be visible, protected, and immediately accessible when an emergency occurs. However, in busy hallways, medical facilities, schools, offices, and other high-traffic environments, a conventional surface-mounted cabinet can extend farther into the circulation path than desired.
A semi-recessed fire extinguisher cabinet offers a cleaner solution. By placing part of the cabinet inside the wall, it combines professional steel storage with a low-profile appearance that preserves valuable hallway space.
What Makes a Semi-Recessed Cabinet Different?
Unlike a fully surface-mounted cabinet, a semi-recessed model is partially installed inside the wall cavity. The Avicenna Innovations cabinet requires approximately 4 inches of recess depth while projecting only 2.5 inches from the finished wall.
With overall exterior dimensions of approximately 27.5 inches high by 13 inches wide, the cabinet provides room for standard 5 lb and 10 lb fire extinguishers while maintaining a streamlined architectural profile.
This makes semi-recessed installation especially practical for:
-
Schools and universities
-
Hospitals and medical facilities
-
Offices and government buildings
-
Hotels and apartment complexes
-
Warehouses and commercial properties
-
Renovation and new-construction projects
Because the cabinet body is partially concealed, the installation looks intentional and built in rather than added to the wall as an afterthought.
A Low-Profile Design for Busy Circulation Areas
Wall-mounted objects located along circulation paths may be subject to federal accessibility requirements. The ADA Standards for protruding objects generally limit objects mounted between 27 and 80 inches above the floor to a maximum projection of 4 inches into a circulation path.
When properly installed, this cabinet projects only 2.5 inches from the wall, helping reduce obstructions in hallways used by pedestrians, wheelchairs, medical equipment, carts, and gurneys.
Final compliance still depends on the complete installation, including mounting height, location, surrounding clearances, wall conditions, and applicable local codes. Facility managers should confirm requirements with the authority having jurisdiction before installation.
Heavy-Duty Steel for Professional Environments
Fire safety equipment should be stored in a cabinet designed for long-term facility use. These semi-recessed cabinets are constructed from industrial cold-rolled steel and finished with a smooth powder coating that helps resist scratches, rust, and corrosion.
A clear front window allows staff to check that the extinguisher is present and visually inspect its condition without opening the door. The interior retaining strap helps keep the cylinder stable and prevents it from shifting or falling forward when the cabinet is opened.
The cabinet is available in two colors:
-
The red semi-recessed fire extinguisher cabinet provides maximum visibility and traditional emergency-equipment identification.
-
The white semi-recessed fire extinguisher cabinet blends naturally with hospitals, schools, offices, hotels, and modern commercial interiors.
Both versions provide the same low-profile construction, capacity, and emergency access features.
Quick Magnetic Access When Seconds Matter
Emergency equipment should not be hidden behind complicated locks or fragile breakable panels. The cabinet door is secured by industrial-strength neodymium magnets that help keep it closed during normal use while allowing immediate access with a firm pull of the handle.
There are no keys to locate and no glass panel to break before reaching the extinguisher. The magnetic system provides a practical balance between secure everyday storage and fast emergency access.
Fits Common 5 lb and 10 lb Fire Extinguishers
The spacious interior is designed to accommodate many standard 5 lb and 10 lb extinguisher models, including commonly used units from Amerex, Kidde, and Badger.
Because extinguisher dimensions can vary by model, buyers should verify the cylinder, handle, gauge, and hose dimensions before installation. Confirming the fit in advance helps prevent compressed hoses, blocked gauges, and doors that do not close correctly.
The extinguisher itself is not included.
A Complete Inspection-Ready Kit
Each cabinet includes the accessories needed to create a more organized and identifiable indoor fire safety station:
-
One projecting fire extinguisher wall sign
-
Ten inspection cards for recording routine checks
-
Ten tamper-evident security seals
-
Four mounting screws and anchors
The projecting wall sign helps occupants locate the extinguisher from multiple directions. Inspection cards make it easier to document routine checks, while the security seals provide a visible indication that the cabinet has been opened or accessed.
OSHA requires workplace fire extinguishers to be mounted, located, and identified so they remain readily accessible to employees. The complete requirements can be reviewed in OSHA Standard 29 CFR 1910.157. Inspection, maintenance, placement, and extinguisher selection should also follow applicable local requirements and NFPA 10.
What to Check Before Installation
Semi-recessed installation requires more planning than attaching a cabinet directly to a finished wall. Before cutting an opening, confirm that:
-
The wall cavity provides sufficient depth.
-
The installation area is free from plumbing, wiring, and structural obstructions.
-
Cutting the wall will not compromise a required fire-rated assembly.
-
The cabinet location keeps the extinguisher visible and unobstructed.
-
The selected extinguisher fits inside the cabinet.
-
Mounting height and wall projection satisfy applicable accessibility and fire codes.
Professional installation is recommended, particularly in commercial, healthcare, educational, and government facilities.
Clean Design Without Compromising Readiness
A semi-recessed steel fire extinguisher cabinet is an effective choice when a facility needs durable equipment protection without sacrificing hallway width or interior appearance.
With heavy-duty steel construction, a 2.5-inch wall projection, quick magnetic access, support for common 5 lb and 10 lb extinguishers, and an included inspection kit, Avicenna Innovations cabinets help create a cleaner and more organized indoor fire safety station.
Choose the high-visibility red cabinet or the architectural white cabinet to match the safety and design requirements of your facility.
Be ready when it matters.
0 comments